CARBURETOR for KAWASAKI motorcycles KDX200-C1 1986 year
Parts
|
Tag
|
Original part number
|
Name
|
Req. Qty
|
Price (1 pc.)
|
|
|---|---|---|---|---|---|
| 132 |
132BA0620 |
BOLT-FLANGED-SMALL | 6 |
83 ¥ $0.53 |
|
| 220 |
220AA0308 |
SCREW-PAN-CROS | 2 |
60 ¥ $0.38 |
|
| 220A |
220AA0406 |
SCREW-PAN-CROS,4X6 | 1 |
71 ¥ $0.45 |
|
| 223 |
223AA0518 |
SCREW-PAN-WS-CROS | 4 |
95 ¥ $0.61 |
|
| 11009 | 11009-1275 | GASKET,FLOAT CHAMBER | discontinued | ||
| 11009A | 16038-009 | GASKET,MAIN JET COVER | discontinued | ||
| 11012 | 11012-1047 | CAP,FLOAT | discontinued | ||
| 13159 |
13159-1010 |
CONNECTOR | discontinued | ||
| 13168 | 13168-1233 | LEVER,STARTER | discontinued | ||
| 13169 | 13169-1190 | PLATE,LOCK | discontinued | ||
| 14024 | 14025-1113 | COVER,THROTTLE VALVE | discontinued | ||
| 15001 | 15001-1202 | CARBURETOR-ASSY | discontinued | ||
| 16002 | 16002-1006 | ADJUSTER-CABLE | discontinued | ||
| 16004 | 16004-1013 | CAP-CHAMBER,MIXING | discontinued | ||
| 16009 | 16009-1226 | NEEDLE-JET,6FL52 | discontinued | ||
| 16012 | 16012-019 | CAP-STARTER PLUNGER | 1 |
1 214 ¥ $7.77 |
|
| 16016 | 16016-011 | PLUNGER | discontinued | ||
| 16017 | 16017-1307 | JET-NEEDLE,R-2 | discontinued | ||
| 16017A | 16017-1308 | JET-NEEDLE,Q-8 | discontinued | ||
| 16017B | 16017-1309 | JET-NEEDLE,R-0 | discontinued | ||
| 16017C | 16017-1310 | JET-NEEDLE,R-4 | discontinued | ||
| 16017D | 16017-1311 | JET-NEEDLE,R-6 | discontinued | ||
| 16021 |
16021-1030 |
SCREW-THROTTLE STOP | discontinued | ||
| 16025 | 16025-1114 | VALVE-THROTTLE,CA.3.0 | discontinued | ||
| 16030 | 16030-1020 | VALVE-FLOAT,3.3 | discontinued | ||
| 16031 | 16031-029 | FLOAT | discontinued | ||
| 16049 | 16049-006 | COVER-MAIN JET | discontinued | ||
| 16055 | 16055-009 | ARM-FLOAT | discontinued | ||
| 16065 | 16065-1045 | HOLDER-CARBURETOR,NEEDLE JET | discontinued | ||
| 16065A | 16065-1138 | HOLDER-CARBURETOR | discontinued | ||
| 92009 | 92009-1412 | SCREW | discontinued | ||
| 92015 | 16003-004 | NUT,CABLE ADJUST LOCK | 1 |
345 ¥ $2.21 |
|
| 92022 | 16039-015 | CAP,RUBBER,STARTER PLUNGER | 1 |
357 ¥ $2.29 |
|
| 92033 | 92036-018 | RING-SNAP | 1 |
190 ¥ $1.22 |
|
| 92037 | 16008-010 | CLAMP,E-TYPE | 1 |
476 ¥ $3.05 |
|
| 92037A |
92171-0652 |
CLAMP,WIRING HARNESS | 1 |
95 ¥ $0.61 |
|
| 92037B | 92037-147 | CLAMP,TUBE | 2 |
309 ¥ $1.98 |
|
| 92037C | 92037-1474 | CLAMP | 2 |
333 ¥ $2.13 |
|
| 92037D | 92037-1484 | CLAMP,CARBURETOR HOLDER | discontinued | ||
| 92043 | 16032-008 | PIN,FLOAT | 1 |
357 ¥ $2.29 |
|
| 92059 |
92059-147 |
TUBE,3.5X6.5X410 | discontinued | ||
| 92059A | 92059-1211 | TUBE,3.5X6.5X350 | discontinued | ||
| 92059B | 92059-1292 | TUBE,4X7X400 | discontinued | ||
| 92059C |
92059-3731 |
TUBE,5.8X10.8X230 | 1 |
417 ¥ $2.67 |
|
| 92063 | 92063-045 | JET-MAIN,#300 | discontinued | ||
| 92063A | 92063-046 | JET-MAIN,#310 | discontinued | ||
| 92063B | 92063-047 | JET-MAIN,#320 | discontinued | ||
| 92063C | 92063-048 | JET-MAIN,#330 | 1 |
928 ¥ $5.94 |
|
| 92063D | 92063-049 | JET-MAIN,#340 | discontinued | ||
| 92064 |
92064-1043 |
JET-PILOT,#20 | 1 |
785 ¥ $5.03 |
|
| 92064A | 92064-022 | JET-PILOT,#30 | 1 |
785 ¥ $5.03 |
|
| 92064B |
92064-1020 |
JET-PILOT,#25 | 1 |
940 ¥ $6.02 |
|
| 92064C | 92064-040 | JET-PILOT,#22.5 | 1 |
785 ¥ $5.03 |
|
| 92064D | 92064-1033 | JET-PILOT,#27.5 | 1 |
785 ¥ $5.03 |
|
| 92081 | 16022-005 | SPRING,THROTTLE STOP SCREW | 1 |
512 ¥ $3.28 |
|
| 92081A | 92081-1181 | SPRING,STARTER PLUNGER | discontinued | ||
| 92081B | 92081-1432 | SPRING,THROTTLE VALVE | discontinued | ||
| 92081C | 92081-1625 | SPRING,PLATE | discontinued | ||
This catalog contains parts for motorcycles KAWASAKI KDX200-C1 1986 year.
How to use parts catalog:
- Find the necessary group, for example: CARBURETOR for KAWASAKI KDX200-C1 1986 year.
-
Determine the required spare part.
for example:
- 132 / 132G0620 / BOLT-FLANGED-SMALL / 83 ¥ ( $0.53 )
- 92081C / 92081-1625 / SPRING,PLATE / 1 226 ¥ ( $7.85 )
- If the spare part does not have a price and costs {upon request} — you can send a request to us and after receiving a response from the manufacturer we will let you know by
e-mail . - It sometimes happens that a spare part has several parts numbers — we ask you to check the correctness of the number selection or check with the manager of our company.
Average processing time in Japan is about 1 week after payment.
After the spare parts have arrived at our warehouse, you will be able to create a package (specify the data for shipment, choose a delivery method) — we will pack and inform the delivery cost. You pay, and we will send the package to you with a tracking number.
If you have questions about work — please do not hesitate to ask our manager by mail info@