REAR TRANSMISSION CASE for HONDA compact tractors H6522 A4
Parts
|
Tag
|
Original part number
|
Name
|
Req. Qty
|
Price (1 pc.)
|
|
|---|---|---|---|---|---|
| 1 | 15421-759-003 | FILTER, OIL | 1 | discontinued | |
| 2 | 15423-759-003 | HOLDER, OIL FILTER | 1 | quote request | |
| 3 | 20003-764-640 | CASE ASSY., RR. TRANSMISSION | 1 | quote request | |
| 4 | 21122-759-000 | PLATE, OIL GUIDE | 1 | quote request | |
| 5 | 21211-764-640 | CASE, RR. TRANSMISSION | 1 | quote request | |
| 6 | 21216-759-003 | PLATE, SUCTION | 1 | quote request | |
| 7 | 23251-759-000 | SHAFT, FINAL | 1 | quote request | |
| 8 | 24230-764-640 | JOINT SET, AUXILIARY LEVER | 1 | quote request | |
| 9 | 24331-759-000 | ARM, SHIFT (2/4WD) | 1 | quote request | |
| 10 | 24385-764-640 | SHAFT, CHANGE (2/4WD) | 1 | quote request | |
| 12 | 24430-764-640 | JOINT SET, P.T.O. LEVER | 1 | quote request | |
| 13 | 24452-679-000 | SPRING, BALL SETTING | 1 | quote request | |
| 14 | 24519-PB6-000 | SCREW, BALL SPRING SETTING | 1 |
235 ¥ $1.52 |
|
| 15 | 32103-759-000 | BRACKET, WIRE HARNESS CLIP | 1 | quote request | |
| 16 | 35600-HC0-003 | SWITCH, REVERSE (TOYO) (NOT AVAILABLE) | quote request | ||
| 17 | 35615-763-A00 | WIRE, NEUTRAL SWITCH | 1 | quote request | |
| 18 | 41341-PC9-010 | GEAR, DIFFERENTIAL PINION | 2 |
2 340 ¥ $15.12 |
|
| 19 | 41351-689-000 | WASHER A, DIFFERENTIAL PINION (0.7MM) | 2 |
235 ¥ $1.52 |
|
| 19 | 41352-689-000 | WASHER B, DIFFERENTIAL PINION (0.8MM) | 2 |
235 ¥ $1.52 |
|
| 19 | 41353-689-000 | WASHER C, DIFFERENTIAL PINION (0.9MM) |
235 ¥ $1.52 |
||
| 19 | 41354-689-000 | WASHER D, DIFFERENTIAL PINION (1.0MM) | 2 |
235 ¥ $1.52 |
|
| 19 | 41355-PC8-000 | WASHER E, DIFFERENTIAL PINION (0.75MM) |
230 ¥ $1.49 |
||
| 19 | 41356-PC8-000 | WASHER F, DIFFERENTIAL PINION (0.85MM) | 2 |
230 ¥ $1.49 |
|
| 19 | 41357-PC8-000 | WASHER G, DIFFERENTIAL PINION (0.95MM) |
230 ¥ $1.49 |
||
| 20 | 45241-759-000 | PINION, RR. DRIVE | 2 | quote request | |
| 21 | 45300-759-000 | DIFFERENTIAL SUB-ASSY. | 1 | quote request | |
| 22 | 45311-759-000 | CASE, RR. DIFFERENTIAL | 1 | quote request | |
| 23 | 45316-759-000 | GEAR, RR. DIFFERENTIAL DRIVEN | 1 | quote request | |
| 24 | 45321-759-000 | SHAFT, PINION | 1 | quote request | |
| 25 | 45381-759-000 | HOLDER, R. DIFFERENTIAL BEARING | 1 | quote request | |
| 26 | 45391-759-000 | HOLDER, L. DIFFERENTIAL BEARING | 1 | quote request | |
| 27 | 73292-752-800 | COLLAR (17.3X28) | 1 | quote request | |
| 28 | 90011-689-000 | BOLT, HEX. (10MM) | 10 |
180 ¥ $1.16 |
|
| 29 | 90029-PB6-000 | BOLT, SPECIAL (8X22) | 1 |
280 ¥ $1.81 |
|
| 30 | 90081-PB6-000 | BOLT, PLUG (14MM) | 1 |
410 ¥ $2.65 |
|
| 31 | 90146-759-000 | BOLT, CHANGE ARM | 2 | quote request | |
| 32 | 90241-MB0-000 | NUT, LOCK (30MM) | 1 |
990 ¥ $6.39 |
|
| 33 | 90242-MB0-000 | NUT, LOCK (64MM) | 1 |
1 560 ¥ $10.08 |
|
| 34 | 90401-759-000 | SHIM A, R. RR. DIFFERENTIAL (1.00) | 1 | quote request | |
| 34 | 90402-759-000 | SHIM B, R. RR. DIFFERENTIAL (1.05) | 1 | quote request | |
| 34 | 90403-759-000 | SHIM C, R. RR. DIFFERENTIAL (1.10) | 1 | quote request | |
| 34 | 90404-759-000 | SHIM D, R. RR. DIFFERENTIAL (1.15) | 1 | quote request | |
| 34 | 90405-759-000 | SHIM E, R. RR. DIFFERENTIAL (1.20) | 1 | quote request | |
| 34 | 90406-759-000 | SHIM F, R. RR. DIFFERENTIAL (1.25) | 1 | quote request | |
| 34 | 90407-759-000 | SHIM G, R. RR. DIFFERENTIAL (1.30) | 1 | quote request | |
| 34 | 90408-759-000 | SHIM H, R. RR. DIFFERENTIAL (1.35) | 1 | quote request | |
| 34 | 90409-759-000 | SHIM I, R. RR. DIFFERENTIAL (1.40) | 1 | quote request | |
| 34 | 90410-759-000 | SHIM J, R. RR. DIFFERENTIAL (1.45) | 1 | quote request | |
| 34 | 90411-759-000 | SHIM K, R. RR. DIFFERENTIAL (1.50) | 1 | quote request | |
| 34 | 90412-759-000 | SHIM L, R. RR. DIFFERENTIAL (1.55) | 1 | quote request | |
| 34 | 90413-759-000 | SHIM M, R. RR. DIFFERENTIAL (1.60) | 1 | quote request | |
| 34 | 90414-759-000 | SHIM N, R. RR. DIFFERENTIAL (1.65) | 1 | quote request | |
| 34 | 90415-759-000 | SHIM O, R. RR. DIFFERENTIAL (1.70) | 1 | quote request | |
| 34 | 90416-759-000 | SHIM P, R. RR. DIFFERENTIAL (1.75) | 1 | quote request | |
| 34 | 90417-759-000 | SHIM Q, R. RR. DIFFERENTIAL (1.80) | 1 | quote request | |
| 34 | 90418-759-000 | SHIM R, R. RR. DIFFERENTIAL (1.85) | 1 | quote request | |
| 34 | 90419-759-000 | SHIM S, R. RR. DIFFERENTIAL (1.90) | 1 | quote request | |
| 34 | 90420-759-000 | SHIM T, R. RR. DIFFERENTIAL (1.95) | 1 | quote request | |
| 34 | 90421-759-000 | SHIM U, R. RR. DIFFERENTIAL (2.00) | 1 | quote request | |
| 35 | 90412-679-000 | WASHER, CONICAL SPRING (8MM) | 1 |
120 ¥ $0.78 |
|
| 36 | 90422-759-000 | SHIM A, L. RR. DIFFERENTIAL (1.00) | 2 | quote request | |
| 36 | 90423-759-000 | SHIM B, L. RR. DIFFERENTIAL (1.05) | 2 | quote request | |
| 36 | 90424-759-000 | SHIM C, L. RR. DIFFERENTIAL (1.10) | 2 | quote request | |
| 36 | 90425-759-000 | SHIM D, L. RR. DIFFERENTIAL (1.15) | 2 | quote request | |
| 36 | 90426-759-000 | SHIM E, L. RR. DIFFERENTIAL (1.20) | 2 | quote request | |
| 36 | 90427-759-000 | SHIM F, L. RR. DIFFERENTIAL (1.25) | 2 | quote request | |
| 36 | 90428-759-000 | SHIM G, L. RR. DIFFERENTIAL (1.30) | 2 | quote request | |
| 36 | 90429-759-000 | SHIM H, L. RR. DIFFERENTIAL (1.35) | 2 | quote request | |
| 36 | 90430-759-000 | SHIM I, L. RR. DIFFERENTIAL (1.40) | 2 | quote request | |
| 36 | 90431-759-000 | SHIM J, L. RR. DIFFERENTIAL (1.45) | 2 | quote request | |
| 36 | 90432-759-000 | SHIM K, L. RR. DIFFERENTIAL (1.50) | 2 | quote request | |
| 36 | 90433-759-000 | SHIM L, L. RR. DIFFERENTIAL (1.55) | 2 | quote request | |
| 36 | 90434-759-000 | SHIM M, L. RR. DIFFERENTIAL (1.60) | 2 | quote request | |
| 36 | 90435-759-000 | SHIM N, L. RR. DIFFERENTIAL (1.65) | 2 | quote request | |
| 36 | 90436-759-000 | SHIM O, L. RR. DIFFERENTIAL (1.70) | 2 | quote request | |
| 36 | 90437-759-000 | SHIM P, L. RR. DIFFERENTIAL (1.75) | 2 | quote request | |
| 36 | 90438-759-000 | SHIM Q, L. RR. DIFFERENTIAL (1.80) | 2 | quote request | |
| 36 | 90439-759-000 | SHIM R, L. RR. DIFFERENTIAL (1.85) | 2 | quote request | |
| 36 | 90440-759-000 | SHIM S, L. RR. DIFFERENTIAL (1.90) | 2 | quote request | |
| 36 | 90441-759-000 | SHIM T, L. RR. DIFFERENTIAL (1.95) | 2 | quote request | |
| 36 | 90442-759-000 | SHIM U, L. RR. DIFFERENTIAL (2.00) | 2 | quote request | |
| 37 | 90443-KR0-000 | WASHER, NEUTRAL SWITCH | 1 |
100 ¥ $0.65 |
|
| 38 | 90551-759-000 | WASHER, THRUST (30.3X50X1.5) | 2 | quote request | |
| 39 | 90683-SA0-003 | CLIP, WIRE HARNESS (25MM) | 1 |
165 ¥ $1.07 |
|
| 40 | 91055-759-000 | BEARING, RADIAL BALL (6012) | 1 | quote request | |
| 41 | 91073-759-003 | BEARING, RADIAL BALL (5206V12) | 1 | quote request | |
| 42 | 91202-444-023 | OIL SEAL (14X24X6) (ARAI) | 1 |
350 ¥ $2.26 |
|
| 43 | 91205-965-003 | OIL SEAL (22X31X5) (ARAI) | 2 |
320 ¥ $2.07 |
|
| 44 | 91552-764-640 | COLLAR (22.2X28X11) | 1 | quote request | |
| 45 | 92900-10090-0B | BOLT, STUD (10X90) | 11 |
110 ¥ $0.71 |
|
| 46 | 94001-04080-0S | NUT, HEX. (4MM) | 1 |
25 ¥ $0.16 |
|
| 47 | 94109-12000 | WASHER, DRAIN PLUG (12MM) | 1 |
60 ¥ $0.39 |
|
| 48 | 94109-14000 | WASHER, DRAIN PLUG (14MM) | 1 |
70 ¥ $0.45 |
|
| 49 | 94305-40282 | PIN, SPRING (4X28) | 1 |
60 ¥ $0.39 |
|
| 51 | 95701-06012-08 | BOLT, FLANGE (6X12) | 3 |
35 ¥ $0.23 |
|
| 52 | 95701-08025-08 | BOLT, FLANGE (8X25) | 10 |
50 ¥ $0.32 |
|
| 53 | 95701-10035-08 | BOLT, FLANGE (10X35) | 2 |
55 ¥ $0.36 |
|
| 54 | 95701-10090-08 | BOLT, FLANGE (10X90) | 1 |
100 ¥ $0.65 |
|
| 55 | 96100-60100-00 | BEARING, RADIAL BALL (6010) | 1 |
1 550 ¥ $10.01 |
|
| 56 | 96211-10000 | BALL, STEEL (#10) (5/16) | 1 |
15 ¥ $0.10 |
|
This catalog contains parts for compact tractors HONDA H6522 A4 .
How to use parts catalog:
- Find the necessary group, for example: REAR TRANSMISSION CASE for HONDA H6522 A4 .
-
Determine the required spare part.
for example:
- 1 / 15421-759-003 / FILTER, OIL / 2 810 ¥ ( $18.15 )
- 56 / 96211-10000 / BALL, STEEL (#10) (5/16) / 15 ¥ ( $0.10 )
- If the spare part does not have a price and costs {upon request} — you can send a request to us and after receiving a response from the manufacturer we will let you know by
e-mail . - It sometimes happens that a spare part has several parts numbers — we ask you to check the correctness of the number selection or check with the manager of our company.
Average processing time in Japan is about 1 week after payment.
After the spare parts have arrived at our warehouse, you will be able to create a package (specify the data for shipment, choose a delivery method) — we will pack and inform the delivery cost. You pay, and we will send the package to you with a tracking number.
If you have questions about work — please do not hesitate to ask our manager by mail info@